home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / sys / amiga / hardware-part1 / 3314 < prev    next >
Encoding:
Internet Message Format  |  1996-08-05  |  1.6 KB

  1. Path: in1.uu.net!DIALix!acix!johnv
  2. Subject: Re: Odd interaction between A3000 & external
  3. Newsgroups: comp.sys.amiga.hardware
  4. References: <19960131.78595B0.103D2@yankee.nai.net>
  5. Distribution: world
  6. From: johnv@acix.DIALix.oz.au (John Verhoeven)
  7. Message-ID: <johnv.09gr@acix.DIALix.oz.au>
  8. Date: Thu, 1 Feb 96 20:59:38 +0800
  9. Organization: ACix - Private UUCP Node, Cloverdale, Western Australia.
  10.  
  11. In article dated Wed, 31 Jan 96 18:12:19, Joshua Helm (lucifer@yankee.nai.net) wrote:
  12. > Try this to get the A3000 to boot with no CD in the drive:
  13. >  * First, set your CDROM drive's SCSI ID to the last one on the chain.
  14. >         (Mine has 2 HD's ID#0 & ID#1 and a CDROM ID#6)
  15. >  * Be sure the CDROM is off and boot the Amiga
  16.  
  17. There is no need to power the CD_ROM off or rebbot your amiga.  Add the
  18. tooltype 'SCSI_MAX_ADDRESS=5' (if your CD-ROM is at ID=6) to HDToolBox and
  19. then start HDToolbox.  This will stop HDToolBox from seeing your CD-ROM.
  20.  
  21. >  * Load HDToolBox - It should complain that drives have been added or removed.
  22. >  * Click the "Save Changes" button on any drive(s) that will let you
  23. >         (Should be the last drive on the chain BEFORE the CDROM)
  24. >  * Exit HDToolBox.
  25.  
  26. These instructions are OK.
  27.  
  28. >  * Restart your computer - This time with the CDROM drive ON.
  29.  
  30. Not needed.  CD-ROM was never off!
  31.  
  32. --
  33.  _--_|\  John Verhoeven (johnv@acix.DIALix.oz.au or johnv@DIALix.oz.au)
  34. /      \ >>>> Writing programs in assembler is like digging post <<<<
  35. *_.--._/ >>>> holes with a teaspoon:  it takes a long time, but  <<<<
  36.       v  >>>> you have complete control over all the dirt.       <<<<
  37.